For most of his career, Vincent Bouchiat was a physicist at CNRS working on quantum electronics and nanostructures, far from hospitals or water plants. Then his team began placing living cells on graphene, and the material turned out to do more than coexist with biology. Bouchiat is now CEO and co-founder of Grapheal, a French company that turns that physics into disposable sensors. Grapheal is also part of the QSTP x TotalEnergies WaterTech Accelerator, where it is bringing its water sensors to Qatar.
A professor leaves the lab
Grapheal grew directly out of Bouchiat’s research as a professor of physics at CNRS in Grenoble. With his team, he invented a method to produce monolayer graphene, a highly sensitive material, at large scale and with a process that is easily scalable. That makes it possible to integrate sensors at low-cost using flexible and printed electronics, and Grapheal applies them to unmet needs in analytical testing, from process monitoring to in vitro diagnostics and wearables.
The turning point, Bouchiat says, came when the team started placing living cells on graphene. His question changed “from ‘how does this material behave?’ to ‘who needs this?’” The first answer was wound care, where nurses still judge healing by eye.

In 2019 I left the comfort of the lab to found Grapheal and turn that physics into sensors people could actually use.
Vincent Bouchiat
A defining moment came during the Covid 19 pandemic, when the team developed a sensor that could reliably track viral infections and provide digital evidence of viral presence directly in the field. The unexpected moment came later, when the same chip that reads a wound turned out to be able to read a glass of water. Grapheal’s work on water is about three years old.
How the sensor works
Grapheal’s sensors combine several proprietary technologies: nanotechnology, graphene on polymer, biochemistry, surface chemistry, printed electronics and embedded RFID systems. The principle, Bouchiat says, is simple. An electrical current flows through a very thin layer of carbon. When a target molecule binds to the sensor, the current changes and the electronics detect it. The size of the change is proportional to the amount of pollutant, which allows sensitive and selective measurement down to ultra trace concentrations.
Asked what was hardest to engineer, Bouchiat points to the chemistry. “The chemical layer that is making the sensor specific to only one target by rejecting binding of other molecules is, by far, the most difficult part to engineer.” It also echoes the discovery that began the company. Graphene, in his words, “was not just compatible with biology; it could listen to it, molecule by molecule.”
Grapheal describes a portable platform called HEXYS, built on graphene field effect transistors. Because graphene is a single atomic layer, every atom is at the surface, so a few target molecules captured by the receptors change its charge and therefore the current. The readout is label free and arrives in quasi real time, at 10 to 30 minutes. Each card carries eight channels, so several pollutants, references and controls can be measured in one run, and the graphene is grown on polymer film in Grapheal’s own reactor for low cost disposable sensors.

Why measure PFAS on site
PFAS are a class of very stable chemical compounds that Bouchiat says are slowly increasing in natural ecosystems because of industrial activity. Even at very low concentrations they matter, he explains, because toxicologists have found that they bioaccumulate in mammals, including humans, and are linked to cancers and reproductive disorders. Today, tracking them is slow and costly. Samples must be frozen and sent to a centralized laboratory, with a typical wait of two to three weeks.
Grapheal’s portable method, called PFAST, is meant to change that. It gives data directly where the concern is, in less than 45 minutes and for a fraction of the cost. Bouchiat acknowledges the tradeoff. It is not yet as precise as the reference method. What it offers is field data that fills a gap in the demand for direct quantification of PFAS. The same logic applies to pathogens. Current methods require sending samples to a centralized laboratory and waiting for a 24-hour incubation culture, while a sensor that gives results on site lets decisions be made quickly and health hazards reduced.
Water is never just water
The nature of the water, Bouchiat notes, significantly influences how a sensor operates, whether it is seawater, drinking water or industrial wastewater. To compensate, Grapheal engineered a microfluidic method that washes the sensor and assesses how much of the target has adsorbed, irrespective of the matrix. The sensor can therefore work in many environmental conditions, including heavily loaded solutions such as brine, sludges and leachates. Qatar adds its own demands. The climate brings heat near 50 degrees Celsius, along with humidity and dust, so the sensors need temperature compensation and rugged housings.
The first customers are water utilities and wastewater treatment plants. With real time data, Bouchiat says, they can adjust their filtration process to the level of pollution arriving at the plant. Each measurement uses a single use sensor, and the data can be uploaded to a plant’s SCADA information system, like data from existing sensors such as pH and conductivity.
Why Qatar
Bouchiat sees unique opportunities in Qatar.

Water safety is at the core of the Qatar 2030 goals.
Vincent Bouchiat
Grapheal’s sensors address a strategic asset by producing reliable data at the place of concern. The difference from Europe is what drives the market. “In Europe, regulation pulls water sensors into the market. In Qatar, water security does.” Grapheal is not transplanting a European product, he adds, but adapting it, and he expects that to make it stronger everywhere. Customers are a few large public players, such as the water utility, the public works authority and industry, who buy through pilots, relationships and local presence.
Inside the accelerator, Grapheal is proposing several types of pilot depending on the partner. It is collaborating with research laboratories to calibrate its sensors for the region’s environmental conditions. It is offering agrifood stakeholders direct, easy to implement and affordable ways to assess water purity. And it aims to address water reuse, so that this emerging activity can flourish safely and reliably.
What it takes to go beyond a pilot
Bouchiat is specific about what turns a field test into a regional network. The sensor has to be validated in the field for months, and authorities have to “trust the readings enough to act on them.” Technically, that means stable sensors produced reproducibly on Grapheal’s own line, with automatic temperature compensation and calibration, checked side by side against the reference gold standard method and connected to a secure in-country data platform.
For Bouchiat, the reasoning comes back to the water itself. In a country like Qatar, he says, “knowing what is in the water is not a luxury.” Then, simply,

That is why Grapheal is here.
#Grapheal #WaterTech #Desalination #WaterSecurity #Qatar #QSTP #Innovation #Sustainability